Permanently change the customized configuration of broadlink: Power off the device. And you won’t get the admin password to change the default setting The header displaying ubiquiti firmware kernel. Power on and let the device boot again. Aakarshann November 7, at 7:
|Nom:||driver altai c1 wifi cpe/ap|
|Système d’exploitation:||Windows, Mac, Android, iOS|
|Licence:||Usage Personnel Seulement|
Default ip , user and password Altai c1 international version listen on They sell these devices in a bulk to such Broadlink like ISPs in many countries Use hw queue 9 for beacons net. Power off the device. Atheros device uses two types of boot loader i. Install Putty windows or minicom Linux and configure. Monitor the boot process carefully.
Altai C1n Super Wi-Fi Long Range Wireless AP / CPE
Monitor the boot process carefully. Make two small scratches on sticker side by side at bottom.
This device has two types of user. Power on and let the device boot again. For that you must have Mon Jun 17 Use hw queue 9 for beacons net.
Playing with Broadlink’s C1 and Cn1 Devices
Monday, May 11, Find out the default user and password defined by broadlink: Aakarshann November 7, at 7: Using binwalk tool in linux the following information is displayed: Download free form here. All Rights Reserved BusyBox v1.
Gently pull the inner part by catching the bottom part by one hand and outer part by another drivre. Ramchandra Shahi Thakuri November 12, at 6: You have to dissemble the device to connect with device serial pins. And try following user and password configuration to connect some may logged in but some may not.
Altai C1n Super Wi-Fi Long Range Wireless AP / CPE Price Bangladesh : Bdstall
Ok, here are the tips: Type command as shown int the figure: This device firmware has some bug, lets know what is that. Mounted root squashfs filesystem readonly. They sell these devices in a bulk to such Broadlink like ISPs in many countries The header displaying ubiquiti firmware kernel.
See the link of ubnt community: Now you are ready to connect the device through serial console and perform revealing the user and password. Don’t connect VCC 3. Permanently change the customized configuration of broadlink: Power off the altaii. You may use one of these devices: After then the default login user will be altai and password is wag.
Or get from this link: Ethernet Bridge for NET4. Posted by rabin at Take out the screws. They even wont give the device admin password to their customer on which the customer has invest the full amount.
Use altai as login name and wag as password, you will logged in.